Specifications

5.5Kw MDF and aluminum cnc router air vacuum bed pump :
1.Vacuum:-280mbar
2.Output:380m3/h
3.Pressure:480mbar
4.oil free

5.5Kw MDF and aluminum cnc router air vacuum bed pump

Feature :

1.Impeller JQT series gas ring vacuum pump installed on the motor rotor directly and no touch compression completely.

2.As the bearing is installed in the compression chamber outside,It can ensure the machines Max. working possibility under the Max. different pressure.

 

Configuration:

Power:5.5Kw

Voltage:3phase AC220V/AC380V/50Hz-60HZ

Max. Pressure:48kPa

Vacuum:-28kPa

Max. air output:380m3/h

Pressure of working:less than 29kPa

Net. Weight:58kg

Dimensions:486*418*455mm

Working principle:

Inlet 1 suck gas firstly,then it goes into side channel 2,the impeller will give gas a speed in the direction of rotation.The centrifugal force of the blade make the gas acceleration and pressure increased.Gas pressure to further increased because of revolving and gas kinetic energy increased.

At last,side channel is becoming narrow at the exit,the gas is squeezed out pressure chamber and exit.

Detailed Photo:

If you are interested in our products ,Please don't hesitate to contact me.